MOISTURE SEPARATORS :-

Have a purpose of removing the condensate obtained after cooling the compressed air, which causes corrosion of  pneumatic tools, instruments, & machinery. Two different methods for separating moisture laden air are baffle or centrifugal & coalesing type filtration. Each design poses the distinct problem of inefficiency or high cost. The centrifuge principle uses a specially designed diffusor & a coalesor to guarantee the maximum efficiency.

The best of both world is achived in this unique siemag separator which combines the simplicity & efficiency of the twin separation method into one product that performs in a class of itself  Anti reintrainment baffle at the bottom of the body.

High efficiency (more than 99%)

Several optional configurations

to suit any need :

Carbon Steel

Stainless Steel

Other materials

All major design codes

High working Pressures

Special execution on request

Low pressure drop

No maintainance

THE TWIN ACTION MOISTURE SEPARATOR

Moisture laden air enters and travels to the bottom of the vessel, where it is forced to pass through the directional diffusor which gives a centrifugal The action. Water droplets as well as any other aerosols are intercepted by this diffuser. The spinning action of air while travelling through the diffuser inpinges droplets of water on the wall of the separator & gets accumulated at the bottom. The balance aerosol-laden air then passes through the specially designed coalescing medium vertically upwards. The aerosols coalesce to form into droplets & by virtue of their own weight get pulled down by gravity. This two stage action of interception by the diffuser first and then by the coalesor makes the siemag Moisture Separator Unique.