shflogo2.gif (2056 bytes) | Profile | General | Moisture Separators | Pre Filters | Micro Coalesors | Cartridges |
| Activated Carbon | Automatic Drain | Diff.Pressure Gauge | Other Products | Home |

MICRO COALESORS


Siemag Micro Coalesors Filter range combines a completely new filter housing with a high performance pleated filter element to eliminate oil from compressed air. The pleated filter construction exposes more than twice the surface area than normal filter of the same size resulting in a much longer service life. The reduction of maintenance and replacement element costs plus the use of only the highest quality materials makes this filter system the best selection.


The micro-coalesor filter range has a proven ability under both laboratory and industrial test conditions of providing clean compressed air for the most stringent of applications.

The filter housings are of all metal construction and fitted with manual drain mechanisms. Auto Drains are optional. Differential pressure guages are available upon request. 

MAT OF CONST

  • Body: Die Cast Aluminium

  • Bowl: Die Cast Aluminium

  • Sight glass: PolyCarbonate

DESIGN FEATURES

  • Max Op. Pr.17 bar g (250 psig )

  • Max Op.Temp. 660C

  • Min Op. Temp. 1.50C

  • Efficiency better than 99.9999%

  • by DOP or BS 3928

  • Particle Removal 0.01 Micron and above

  • Initial Pressure Loss 0.07 bar

  • Operating Pressure Loss 0.3 bar

  • Replace Filter Element at 0.7 bar pr. loss

  • Max Remaining Oil cont. 0.01mg/M3 at 200C

SELECTION AND USE

Select the filter model from the table below depending on pressure and flow rate requirements. Install as close as to the application and replace filter elements when the pressure loss reaches 0.7 bar. For applications with a high degree of contamination the use of pre filtration is recommended. These are available upon request.

CAPACITY TABLE

FLOW / DIMENSIONS CHART

Pipe Model Flow rate Weight DIMENSION OUT LINE PICTURE Rep.

size NM3/4 SCFM A B C Ele. Mod

1/4" MC-0123-MI-2 25 15

1/4" MC-0148-SH-2 40 17

3/8" MC-0148-SH-3 50 30

1/2" MC-0148-SH-4 100 60

3/4" MC-0148-SH-6 215 125

1" MC-01421-SH-8 425 250

1.1/2" MC-05515-FH-14

2" MC-05860-FH-16

3" MC-05875-FH-18

4" MC-05875-FH-20

MC - Microcoalesor / 01 - Grade Of Filter Cartridge / 23 - Element Model / SH - Hsg Model / 2 - Size

Indicate the grade of filter cartridge by putting the appropriate no. after the filter type.

(e.g. MC & then the Grade 01 or 05 followed with the other details)