MOISTURE SEPARATORS :-
Siemag Moisture Separator combines a Twin Separation system. This Unique system which
includes a baffling separation & interception of air through specially designed
coalesor makes the Siemag Moisture Separator different from others. These are the stage 1
Filters which remove moisture from the compressed air line & are installed after the
After-coolers. these Separators work on the Principle of mechanical separation.
PRE-FILTERS
These general purpose filters are used to remove the coarse contamination from the
compressed air stream. These filters are used as Pre-Filters to the micro coalesors &
Activated Carbon filters. Extended element life is best achieved by pre-filtering air with
a siemag pre-filter.
MICRO COALESORS
The Micro Coalesor comes with a pleated filter element made of glass fiber media to
eliminate oil & moisture from the compressed air. ranging from efficiency of 1 micron
& oil at 0.05 mg/m3 to 0.1 micron & oil at 0.01 mg/m3, these filters are available
in moulded & pleated form.
ACTIVATED CARBON FILTERS
Activated carbon filters are used to remove the traces of oil in vapour form &
associated tastes & odors. They are the final stage filters for cleaning of air used
in critical applications. These filters are designed to give 0.005 mg/m3 remaining oil
content, liquid & gas.
AUTO DRAINS
These Micro-Processor based Auto-Drains remove the liquid condensate as per the specified
needs. The On-Off time is adjustable from 0 - 8 sec & 1 - 99 min respectivly.
Available in 1/2" & 1" size & 230 V AC as std voltage (opt.110V, 24V, 12
V ) the siemag of Auto-Drains are very compact. Draining is very essential in any
Pneumatic Circuits.
POP-UP VALVE
The differential pressure indicator is used to monitor the life of the element &
indicates when the filter has reached the end of it’s life. Pressure Drop indicator
shows Red at 7 PSI across filter element. Mounts directly on top of the filter
housing.
D.P GUAGE
A differential pressure guage gives a continous reading of the difference in pressure
across the filter. These D.P. guages continously monitor the pressure drop & are
sensitive in the range of 0 to 1 kg/cm2. Designed to be installed on compressed air or gas
system the warranty ceasess to exist if used on any other fluids.the readable visibility
range is around 5 - 6 mtrs
|
