| Profile | FRL | Solenoid Valves | Needle & Flow Control Valves |
| Air Blow Guns | Fittings & Tubings | Auto Drains | Cylinder |
| DC Valves | Other Products | Enquiry |

Maxi Filters
( Model FSM )

Features :

1. Two stage cleaning action - Cyclone separation of liquids! Residual filtering of solids

2. Non-corrosive 40-micron sintered Bronze/Polypropylene filtering element.
   ( 1, 5 and 25 micron optional )

3. Manual / Automatic Drain

4. Non corrosive 25 µ SB/PP ( 1,5 & 40 optional )

5. May be removed from line for servicing or replacement without use of tools, or breaking pipe connections

Material of Construction :-

• Body and Inserts - Pressure die cast zinc

• Filter element - sintered Bronze/Polypropylene

• Bowl - Polycarbonate transparent ( optional Bowl Guard ) or metallic
  ( 10 oz capacity).

How to Order   :-

Filter Elements : Standardly supplied with 40 micron & 25, 5, 1 optional

Applications :-

The Maxi filter featuring removable multi-sized pipe port inserts is the most flexible & advanced design in the market today. The basic maxi module is designed for efficient water and solids removal with air flow upto 250 SCFM with only modest pressure drop.

This remarkable performance is made possible through the use of 2 stage cleaning action. First, the incoming air is centrifugally cleaned where compressor carry-over oils, liquid condensate and a high percentage of solid contaminants such as pipe scale are spun out of the air stream and directed into the bottom of the bowl to be removed through the draincock. Next, the air is drawn through a 25 micron sintered Bronze/Polypropylene filtering element where the remaining solid particles are removed. Wide open porting, exceptionally large filtering surface area and very efficient baffling contribute to make the Maxi Filter an excellent performer over its entire operating range.

The modular design of the Maxi Filter coupled with its wide range performance makes it ideally suited for all general purpose in-plant or OEM filtering applications for air flow rates up to 250 SCFM. A Maxi Filter does the job for a small ¼" size air drill just as well as it does in a 1" main air line header. The only difference is the pipe port insert size. The same applies for a rapid cycle ½" pneumatically operated welding gun or a continuous operating ¾" pneumatic grinder. The basic Maxi module does the filtering. The pipe port inserts adapt it to the correct pipe size.

Maxi Regulators   Maxi Lubricators
Maxi Comb    Maxi FRL     Accessories